Skip to content
MPUCOATINGS Request a recommendation

Products

Manufacturer support for distributors, contractors and industrial projects

info@mpucoating.com
MPUCOATINGSRequest a system recommendation

Complete system selection

Select a build, not an isolated coating.

Start with the application. Then match the substrate-specific primer, functional intermediate layers, surface coat and accessories as one compatible system.

Compare the six systemsSend project conditions
  1. 01Primer
  2. 02Body / membrane
  3. 03Topcoat
  4. 04Accessory
Illustrative application of a blue resin floor in an industrial facility
Application visualProtection is specified layer by layer.AI-generated illustration; final product codes require current TDS and project-condition review.

How the range is organized

Three product families. Six application systems.

The chemistry family tells you what the material is. The system build tells a contractor or specifier which coordinated products are needed for the job.

Seamless blue protective floor finish in an industrial interior
01 · Protective floorsPolyurea and epoxy floor buildsPrimer → body layer → finish
Illustrative application of a teal waterproof membrane around rooftop drainage details
02 · WaterproofingContinuous membrane systemsPrimer → details → membrane → protection
Illustrative red running track and green multi-sport court surface
03 · Sports surfacesTrack and court material systemsBase → elastic build → color surface → lines

Application system selector

See every layer before choosing a product.

RequiredConditionalOptional
Polyurea coatings

Polyurea flooring system

Protective floor build selected around the substrate, traffic, chemical exposure, UV and return-to-service target.

Review application →
  1. 01
    Primer

    Substrate-specific primer

    Selected for concrete or the approved existing base, including moisture and surface condition.

    Required
  2. 02
    Functional body layer

    Polyurea floor body coat

    Provides the principal continuous protective layer in the approved system build.

    Required
  3. 03
    Intermediate / aggregate

    Build, reinforcement or broadcast layer

    Added when thickness, texture, reinforcement or higher wear resistance is specified.

    Conditional
  4. 04
    Topcoat

    Wear-, chemical- or UV-resistant finish

    Finish chemistry and texture depend on exposure, cleaning, slip profile and appearance.

    Conditional
MPU model mappingP-series primer → M/T-series body or leveling layer → T-series finish → optional F-series clear coat.See product models ↓
Polyurea coatings

Polyurea waterproofing system

Membrane build for concrete or metal structures, with details and exposure determining the protective layers.

Review application →
  1. 01
    Primer

    Concrete- or metal-specific primer

    Seals and promotes adhesion to the prepared substrate; the type changes with the base.

    Required
  2. 02
    Detail treatment

    Mortar repair, joints and reinforced details

    Cracks, penetrations, seams and transitions may require mortar, fabric or an additional intermediate coat.

    Conditional
  3. 03
    Waterproofing layer

    Polyurea elastic membrane

    The primary continuous waterproofing layer, selected for movement, application method and service exposure.

    Required
  4. 04
    Protective topcoat

    Weathering or service-protection finish

    Used where UV exposure, foot traffic, color retention or physical protection requires it.

    Conditional
Typical variantsExposed concrete roofMetal roof detailsNon-exposed waterproofingTrafficable finish
MPU model mappingP-series primer → M-series waterproof layer → T-series exposed finish → optional F-series clear coat.See product models ↓
Epoxy coatings

Epoxy colored sand flooring system

Decorative resin floor build using colored quartz within a fully sealed epoxy system.

Review application →
  1. 01
    Primer

    Epoxy floor primer

    Selected for the prepared concrete, porosity, moisture condition and required adhesion.

    Required
  2. 02
    Base / binder coat

    Epoxy receiving layer

    Receives and anchors the decorative aggregate within the system.

    Required
  3. 03
    Broadcast layer

    Colored quartz aggregate

    Single or multiple broadcast cycles depend on the specified appearance, texture and build.

    Required
  4. 04
    Grout / seal coat

    Clear resin grout

    Locks in the aggregate and controls the final texture before sealing.

    Required
  5. 05
    Topcoat

    Clear protective finish

    Selected around wear, cleaning, gloss level, chemical exposure and slip profile.

    Conditional
MPU product mappingQuotation-derived epoxy product names are available; dedicated public model codes still require confirmation.See product options ↓
Sports flooring materials

EPDM running track systems

Choose the track architecture first. Primer, elastic body and surface products change by system type.

Review application →
  1. 01
    Primer

    Concrete- or asphalt-specific track primer

    Promotes adhesion between the prepared base and the selected resilient system.

    Required
  2. 02
    Elastic base

    Rubber granule and PU binder layer

    Typical in permeable or mixed systems; a full-pour build uses a different PU body architecture.

    Conditional
  3. 03
    Pore sealer / intermediate

    Sealing or PU intermediate layer

    Used in sandwich, mixed or impermeable builds; omitted where the system is designed to remain permeable.

    Conditional
  4. 04
    Wear surface

    EPDM granule, spray coat or full-pour surface

    The surface material and application method follow the chosen track system and performance target.

    Required
  5. 05
    Accessories

    Sealer and line marking paint

    Line marking completes the track; a protective sealer is used only where specified.

    Conditional
Choose a system type firstPermeable / spray-coatSandwich / mixedFull-pour PUEPDM sports area
MPU model mappingCP-series base/surface products combine with the selected PU binder, EPDM granule grade and accessories.See product models ↓
Sports flooring materials

Acrylic court coating system

Hard-court or cushioned acrylic build selected for the base, sport, comfort and playing finish.

Review application →
  1. 01
    Preparation / adhesion

    Repair, primer or adhesion promoter

    Used according to concrete or asphalt condition, repairs and the selected resurfacer.

    Conditional
  2. 02
    Base coat

    Acrylic resurfacer / filler

    Produces a uniform receiving surface and adjusts texture before the color system.

    Required
  3. 03
    Cushion system

    Elastic and reinforcement layers

    Added for a cushioned specification; layer count follows the required comfort and system design.

    Optional
  4. 04
    Color surface

    Acrylic court color coats

    Multiple compatible coats create the required playing texture, color and finish.

    Required
  5. 05
    Accessories

    Line paint and optional clear finish

    Line paint is required for play; a clear finish is included only in an approved system.

    Conditional
Typical variantsHard courtCushioned courtConcrete baseAsphalt base
Model statusAvailable quotation names cover primer, acrylic finishes and slope materials; dedicated cushion/resurfacer codes require confirmation.Review identified products ↓
Sports flooring materials

Elastic silicone PU court system

Resilient court build coordinating the base primer, elastic layers, reinforcement and playing surface.

Review application →
  1. 01
    Primer

    Base-sealing primer

    Selected for the prepared concrete or approved asphalt base and its condition.

    Required
  2. 02
    Elastic layer

    Silicone PU resilient body layer

    Provides the principal elastic layer; grade and build follow the play and project requirement.

    Required
  3. 03
    Reinforcement layer

    Silicone PU strengthening / leveling coat

    Coordinates the resilient body with the surface layer and corrects the approved build.

    Required
  4. 04
    Topcoat

    Water-based silicone PU playing surface

    Creates the colored wear surface and specified playing texture.

    Required
  5. 05
    Accessory

    Line marking paint

    Compatible marking material selected for the sport and completed surface.

    Required
MPU model mappingCQ02-X / CQ02 elastic layers → CQ03 wear layer → CQ05 water-based surface coat → line paint.See product models ↓

MPU model selector

Match each system layer to an actual product.

The models and product names below are extracted from the four current quotation workbooks supplied for this project. Commercial prices and customer information are intentionally excluded. Confirm the current TDS, SDS and compatibility before quotation or specification.

Polyurea code keyP PrimerM Mid coat / body layerT Topcoat or self-leveling finishF Finish / clear coatV Solvent-containingN Solvent-freeW Water-basedWP WaterproofingUV Exterior / UV route
Polyurea coatingsPolyurea flooring model matrix19 identified products

Choose the substrate primer first, then one compatible leveling/body layer and finish. Outdoor, gloss, sanded and self-leveling routes use different topcoat codes.

LayerModelProductPrimary selection cue
PrimerP01VSingle-component polyurethane primerSolvent-containing general primer; confirm traffic and substrate limits.
PrimerP03VMPU tile primerPrimer route for prepared tile and approved non-porous bases.
PrimerP04VTwo-component epoxy primerSolvent-containing epoxy primer.
PrimerP04NSolvent-free epoxy / tile primerSolvent-free primer route for approved floor or tile substrates.
IntermediateM02VMPU polyurea-polyurethane mid coatTwo-component solvent-containing leveling layer.
IntermediateM02NMPU polyurea-polyurethane mid coatSolvent-free leveling route.
IntermediateM02V-WPImmersion floor mid coatSolvent-containing route identified for pools and long-term water exposure.
IntermediateM04VEpoxy mid coatSolvent-containing epoxy leveling layer.
IntermediateT02NPolyurea mid coatSolvent-free leveling/self-leveling body layer; quotation notes indicate no color selection.
TopcoatT04V-GLMPU polyurea-polyurethane topcoatSolvent-containing gloss finish.
TopcoatT04V-SAMPU wear-resistant polyurea topcoatThree-component sanded finish.
TopcoatT04N-SLMPU solvent-free self-leveling finishSolvent-free self-leveling floor route.
Exterior topcoatT06V-GL-UVMPU polyurea-polyurethane topcoatSolvent-containing exterior gloss / UV route.
Exterior topcoatT06V-SA-UVMPU polyurea-polyurethane topcoatThree-component exterior sanded / UV route.
Exterior topcoatT06W-GL-UVWater-based polyurea topcoatWater-based gloss / UV route.
Exterior topcoatT06N-GL-UVMPU solvent-free polyurea topcoatSolvent-free exterior gloss / UV route.
Self-leveling finishT04N-SL-UVMPU solvent-free self-leveling finishSolvent-free self-leveling route; verify current UV scope.
Self-leveling finishT06N-SL-UVMPU solvent-free self-leveling topcoatIndoor/outdoor self-leveling / UV route.
Clear finishF06V-UVClear protective coatOptional clear finish; exact gloss and compatible topcoat require TDS confirmation.
Polyurea coatingsPolyurea waterproofing model matrix10 public-route products

Separate non-exposed membrane products from UV-exposed finish products. The internal quotation also contains legacy or customer-specific items; those are not presented as standard public recommendations.

LayerModelProductPrimary selection cue
PrimerP01VSingle-component polyurethane primerGeneral waterproofing primer; not positioned for heavy floor loading.
PrimerP03VTile / metal primerSolvent-containing primer for prepared tile or metal.
Non-exposed membraneM02N-WPTwo-component polyurethane waterproof layerSolvent-free non-exposed membrane; current replacement for the former M04N-WP code.
Non-exposed membraneM05V-WPMoisture-curing polyurethane waterproof layerSingle-component solvent-containing non-exposed route.
Exposed finishT06N-WP-UVElastic polyurea waterproofing topcoatSolvent-free exterior finish with decorative route.
Exposed finishT06V-GL-UVPolyurea-polyurethane gloss topcoatLower-elasticity exterior decorative finish shared with floor systems.
Exposed finishT06W-WP-UVWater-based polyurea topcoatWater-based UV route; quotation also identifies wall-coating use.
Clear finishF06V-GL-UVTwo-component polyurea clear coatSolvent-containing gloss / UV clear finish.
Clear finishF06W-UVWater-based clear coatWater-based polyurethane-acrylic UV clear route.
Spray membraneSP200 / SP600Two-component spray polyureaSpray-applied route; SP600 is identified for floor and waterproofing applications.
Epoxy coatingsEpoxy colored sand product matrixQuotation names; codes pending
Current gap

The epoxy quotation provides product names and system combinations but not unique product model codes. The public site should not invent codes.

LayerIdentified product optionsHow to choose
PrimerEpoxy primer; high-solids epoxy primer; solvent-free epoxy primer; water-based high-penetration epoxy primerChoose by substrate porosity, moisture condition, odor/VOC route and compatible body coat.
Mortar / intermediateColorless epoxy mid coat; high-solids epoxy mid coat; solvent-free epoxy mid coat; water-based epoxy mid coatCombine only with the approved quartz sand grade and mix ratio for the specified build.
Colored sand surfaceEpoxy colored sand self-leveling topcoatPrimary decorative colored-sand finish identified in the quotation system examples.
Conductive optionConductive epoxy mid coat; anti-static epoxy colored sand self-leveling topcoatUse only as a complete conductive system with verified resistance design and test scope.
Protective finishPolyurethane wear-resistant finish; water-based polyurethane clear coat, matte or glossSelect for required wear, gloss and maintenance after compatibility confirmation.
Aggregate / accessoryQuartz sand; colored quartz; slope aggregate; slope resinGrade, color blend and broadcast cycle follow the approved system build and sample.
Sports flooring materialsEPDM running track model matrixTrack architecture required

Do not select a surface product before choosing permeable, mixed/sandwich or full-pour architecture. Binder and granule ratios shown in internal quotations are not published here as universal specifications.

LayerModel / productPrimary selection cue
Primer / sealerSW01 waterproof primer; SF01 sealing emulsion; interface agentSelect according to concrete/asphalt condition and the chosen permeable or impermeable build.
Elastic baseCP02-X track base rubber; CP02 high-elasticity track base rubberBody-layer options for the approved resilient build.
Granule binderSingle-component PU binder; extra-strength single-component PU binder; yellowing-resistant PU binderMatch binder grade to the approved rubber/EPDM granule system and climate.
Track surfaceCP04 track topcoat; CP04X track topcoat; CP05 self-textured topcoatChoose the surface route after the track architecture and performance requirement are confirmed.
GranulesEPDM base granule; 2–4 mm base/fill granule; 1–3 mm surface EPDM in identified binder-content gradesGranule size, color and grade depend on system position and specified surface.
AccessoryLine marking paint; quartz sand; dispersant; catalystUse only where required by the compatible system and installation method.
Sports flooring materialsAcrylic court product statusDedicated model codes incomplete
Technical confirmation required

The quotation workbooks identify water-based acrylic primer, matte/gloss acrylic finishes, slope aggregate and slope resin. They do not identify dedicated court-grade resurfacer, cushion, reinforcement and line-paint model codes as one complete system.

LayerIdentified quotation productPublication status
Primer / interfaceWater-based acrylic primerConfirm court-grade use and compatible base before mapping.
Color finishWater-based matte acrylic topcoat; high-performance gloss acrylic topcoatConfirm these are the approved sports-court grades, not general floor/wall products.
Texture / slopeSlope aggregate; slope resinCan be listed only after the court construction role and mix guidance are approved.
Missing codesAcrylic resurfacer, cushion, reinforcement/filler and court line paintKeep as system roles until the technical owner supplies dedicated model codes and current TDS.
Sports flooring materialsElastic silicone PU court model matrixCQ-series build

The quotation provides a clear CQ-series progression. Primer and interface product selection still depends on the concrete/asphalt base and approved system detail.

LayerModelProductPrimary selection cue
Primer / interfaceSW01 / SF01Waterproof primer / sealing emulsionSelect by base and approved court system; interface agent is also listed as an accessory.
Elastic layerCQ02-XSingle-component silicone PUSingle-component resilient body-layer route.
Elastic layerCQ02High-elasticity silicone PUHigher-elasticity resilient body-layer route.
Wear / reinforcement layerCQ03Wear-resistant silicone PUQuotation positions this product above the CQ02 high-elasticity layer.
Surface topcoatCQ05Water-based silicone PU topcoatColored playing surface; light-color usage and coverage require current TDS confirmation.
Accessory—Line marking paintConfirm the compatible sports-line product code before publication.

Qualification framework

Six inputs turn the layer diagram into a specification.

  1. 01

    Application and system type

    Floor, waterproofing, track type, hard court or cushioned court.

  2. 02

    Substrate and condition

    Concrete, asphalt, metal or existing system; moisture, cracks and contamination.

  3. 03

    Exposure and load

    Traffic, water, chemicals, UV, movement, climate, cleaning and play.

  4. 04

    Finish and performance

    Color, texture, slip profile, comfort, drainage and applicable standard.

  5. 05

    Area and schedule

    Project size, location, installation window and target completion.

  6. 06

    Current technical documents

    Confirm every product code, revision, compatibility and application limit.

Need a complete product schedule?

Send the application and base condition. Receive a layer-by-layer recommendation.

The response should identify the proposed primer, intermediate layers, topcoat, accessories and missing project inputs—without forcing the buyer to guess a product code.

Request a system recommendation

WE WILL REPLY YOU IMMEDIATELY