Resources
Understand how MPU COATINGS product codes are structured — every suffix and prefix carries a specific meaning.
1
Product Type Code
| Type Code | Starting With | Description |
|---|---|---|
| P | P | Primer |
| M | M | Mid Coat |
| T | T | Top Coat |
| F | F | Finish Coat |
2
Solvent Type
| Suffix | Full Name | Description |
|---|---|---|
| V | Solvent | Contains solvent — VOC product |
| N | Solvent-free | No solvent — Non-VOC product |
3
Surface Finish & Effect
| Suffix | Full Name | Description |
|---|---|---|
| GL | Gloss | Glossy finish |
| SA | Sanded Effect | Anti-slip sanded surface |
| SL | Self-leveling | Self-leveling application |
| FL | Flakes | Decorative flake finish |
| FL1 | Self-leveling Colored Sand — Hardness 1 | Softest colored sand finish, hardness grade 1 |
| FL2 | Self-leveling Colored Sand — Hardness 2 | Medium hardness colored sand, hardness grade 2 |
| FL3 | Self-leveling Colored Sand — Hardness 3 | Hardest colored sand finish, hardness grade 3 |
4
Application & Special Properties
| Code | Type | Description |
|---|---|---|
| UV | Outdoor-specific | UV-resistant, suitable for outdoor use — suffix added after model number |
| WP | Waterproof Products | Starts with WP — Waterproof product line |
| W | Water-based | Water-based formulation — suffix added after digits |
| e- | Electrostatic Floor | Electrostatic dissipative floor — prefix before model number |
| S | Spray Type | Spray application — suffix added after digits |
5
Component Type
| Type | Representation | Notes |
|---|---|---|
| Single-component | Odd Numbers | 1, 3, 5, 7… |
| Two-component | Even Numbers | 02, 04, 06 indicate an increase in product grade |
Grade Suffix Explained
02
Indoor Use
Light colors cannot be made
04
Indoor & Outdoor
Light colors can be made
06
Outdoor Only
High UV resistance required
Naming Example
MPUFLOOR_M04N
MPUFLOOR + Mid Coat (M) + Grade 04 + Solvent-free (N)
MPUFLOOR
Product Line
M
Mid Coat
04
Grade 04 (Indoor/Outdoor)
N
Solvent-free (Non-VOC)
Need a system recommendation for your project?
Share the application, substrate, exposure, area or quantity and project timing so the inquiry can be routed with the conditions that matter.
Share project conditions